Fast, Safe, and Easy to Use | Money-Back Guarantee

Sweet Shooter Logo

Phone Icon (844) 519-9815

Hours of Operation
24 Hours a Day, 7 Days a Week


Accurate Firearms with SWEETSHOOTER


The cleaner the bore, the more accurate your shooting will be. SWEETSHOOTER sets a new standard for cleaning and lubricating your treasured firearms. This gun cleaner is great for black powder shooters. Please note it will look dull on parkerized finishes. Rub some hand lotion into your hands, then massage the weapon to bring back the luster.

Directions for Cleaning the Surface


Prepare the Surface
Cleaning the metal surface of your weapon with SWEETSHOOTER is critical.

  1. Remove grips or stock. Dip your brush into Sweetshooter and scrub the outside vigorously. Repeat several times until the weapon is thoroughly clean. Now the gun is ready to treat.
     
  2. Wet the surface of the gun with SWEETSHOOTER and let it dry completely. (Don't wet again while it's still wet or it will be as though it's the first application.) To hasten the drying time, use a hand held dryer for one hour. But be careful, because the metal will get too hot to handle.
     
  3. After drying thoroughly, wet the metal again, and repeat the drying process. This is the second application. Now do it a third, fourth, and then a fifth and final time. You spent lots of money for your weapon and bought SWEETSHOOTER, so be sure to apply it correctly. This initial process has to be done only the first time. Afterwards, use a patch dipped in SWEETSHOOTER for general cleanup.

Directions for Cleaning & Treating the Barrel


The barrel gets the most stress. Therefore, treating it deep down into the pore structure will ensure greater performance, along with greater protection.

Cleaning the Barrel
Dip your stainless steel bore brush in SWEETSHOOTER and run it into the barrel and scrub 8 times, dip brush again and scrub 8 times, dip brush again for the 4th and final time and scrub 8 times. (This is important, don't cheat!)

Pistol Gun and Bullets

Treating the Barrel

  1. Using the same caliber stainless steel bore brush wet the bore with SWEETSHOOTER.
     
  2. Fire a round. Then re-wet and fire again. Repeat this process at least 20 times. Be sure to wet between each round. The projectile will push the SWEETSHOOTER down into the pores of the metal and pack it until they are full. A micro-thin film is formed in the barrel, reducing friction to a minimum causing greater accuracy, distance, and velocity.
     
  3. Having properly treated your weapon, all you have to do next time you fire it is wet a patch with SWEETSHOOTER, swab the barrel three or four times, then wipe down the outside with the same wet patch. Now you are ready to store it!

SWEETSHOOTER Tips


You can put oil on your weapon without any harm to your firearm. However, be aware that oil will attract dirt, grime, and grit.

Don't forget to treat your knives, fishing tackle, and tools too! You don't have to worry when your carbon steel knives are exposed to blood. With an application of SWEETSHOOTER, the blood will not corrode the blade. Just go through the same cleaning process and wet the blade five times with SWEETSHOOTER, drying thoroughly between each application.

Before you cast your line, wet your reel with SWEETSHOOTER lubricant. Repeat 20 times to build the film. You'll be able to feel the difference as the film reduces snagging, inhibits corrosion, and increases distance. Treat your pole eyes and fishing line as well for more effectiveness.